NATIONALITY: French
DATE OF BIRTH: 22, April 1955
QUALIFICATIONS: M.Sc. (Safety + Reliability+Maintenability+Availability)
B.Sc. (Control + Instrumentation)
B.Sc. (Physics)
AICHE, International WHO's WHO of Professionals
Over twenty years of engineering, design, procurement and construction of petrochemical, oil and gas industries both onshore and offshore. Experience includes HSE management, Risk Base Design for EPC projects. Expertise also include Safety & Environment code and standard compliance, pipeline Risk Assessment, Critical system identification, performance standard re-quirements, SIL assessment, HAZOP studies, Qualitative and Quantitative Risk Assessment (QRA).
EXPERIENCE:
September 2001 to Date / ZIRAK L.L.C. (UK and Abu Dhabi)
General Manager
www.zirak.net
March 2004- June 2005 / Parsons E&C
HSE Manager for BU HASSA FACILILITIES DEVELOPMENT PRO-JECT- ABU DHABI, responsible for:
- Review and comment the HSE documents of Snamprogetti, Fano Italy.
- Advise, participate and analyze project HSE Review (PHSER), Risk Assessment.
- Review and comment the safety engineering project studies such as, Fire and safety protection/detection systems, Emergency shutdown systems, cause and effect Diagrams and safety philosophy and Haz-ardous area classification drawings.
- Report the performance of CONTRACTOR to ADCO Project Manager.
March 2003 to December 2003 / SOFREGAZ France
RHOURDE NOUSS GAS SEPARATION AND COMPRESSION (FEED)- ALGERIA
HSE Manager/Lead safety Engineer
- Development of the HSE Plan.
- Fire&Explosion studies by PHAST.
- QRA studies.
- Definition of the HSE scope of work for EPC Contractor.
- Fire water demand calculation.
- Review of the Hazardous area classification drawing according to API 500, Fire & Gas specification, fire water network, design of fire fighting system, Cause and effect matrix according to API 14 C.
- Participate in HAZOP studies
- Coordination with EIA consultant.
BOTAS TGPS PIPELINE PROJECT (FEED) - HSE Manager
- Development of the HSE Plan
- Development of QRA for TGPS pipeline.
- Issue of safety concept
- Safety design of Pressure reduction Station, isolation valves and pig launcher stations.
October 2002 to March 2003 / PARSONS E&C (USA)
HABSHAN RUWAIS LIQUID SULPHUR PIPELINE PROJECT - HSE Manager
- Definition of the project HSE deliverables and progress reporting.
- Report the HSE activities to Project Manager.
- Development of HSE requirement for EPC Contractor.
- Development of QRA and Risk Transect for sulphur pipeline.
- Safety Integrity Level (SIL) Assessment for Skin Effect Heat Tracing system
- Fire & explosion analysis with FRED software package.
- Cold flare studies for determination of the H2S ground level concentration.
- Participation in the HAZOP/HAZID/SEMI-QUANTITATIVE RISK ASSESSMENT.
August 2001 to October 2002 / JOHN BROWN (UK)
Principal Safety Engineer
- Development of Risk Transect and FN curves for Gas and oil pipelines.
- Review and comments on the RAMS study.
- Safety Integrity Level (SIL) Assessment for the Pressure reducing systems loops according to IEC65108 both Qualitative and Quantitative approach.
- HIPPS studies for the overpressure protection and reliability analysis using LOGON software package.
- Fire & explosion analysis with PHAST software package.
- Cold flare studies for determination of the ground level concentration and height of the HP & LP flare system.
- Participation in the HAZOP studies for the Gas pipeline project as safety engineer
April 2001 to August 2001 / KVAERNER Abu Dhabi (U.A.E.)
PMC HSEQ Engineer
- HSE Technical Bid Evaluation of the EPCM Contractors for Gas Injection Project.
- Review and comments of the HSEQ aspects of the construction contractor proposal. - Technical Bid Evaluation of the Third Party verification & Certification Agencies.
April 2000 to April 2001 / ADWEA Abu Dhabi ( U.A.E.)
Water & Electricity Regulation & Supervision Bureau
Corporate HSE Advisor
- Review of Company' s health and safety and environmental policies.
- Design of an Health, Safety and Environment performance monitoring system. The system follows international standards and definitions to allow comparison of performance in Abu Dhabi with similar international industries.
- Issue of major HSE Incident regulation and guideline in HSE incident investigation.
- Development of an audit regime for licensees' Health, Safety and Environmental systems.
- Examine available audit tools and recommend to the Bureau adoption of an audit tool. Carry out baseline audit of licensees' HSE Management Systems.
- Participation on the web site development for the Bureau: http://www.rsb.gov.ae
December 1998 to March 2000 / Multiplan Abu Dhabi (U.A.E.)
Area Manager Middle East
- HSE Prequalification of Multiplan R&F in all ADNOC Group of Companies
- Marketing of Multiplan products such as ADEPP-HSEQ Toolkit for an integrated HSE & Quality Management System.
May 1998 to October 1998 / Parsons Energy & Chemical (UK)
Senior Safety (HSE) Engineer
ADNOC- ODG Phase II
- Review and comments of all safety (HSE) documents of TECHNIP-BECHTEL joint venture.
- Advise, participate and analyse of HSE impact assessment (HSEIA), project HSE Review (PHSER), Risk Assessment.
- Review and comments on safety engineering project studies such as, Fire and safety protection/detection systems, Emergency shutdown systems, cause and effect Diagrams and safety philosophy and Hazardous area classification drawings.
Report the performance of CONTRACTOR to ADNOC Senior Project Manager.
Nov. 1995 to May 1998 / Kvaerner (Croydon/UK)
Principal Safety Engineer
Amerada Hess Ltd. - Triton FPSO project
Definition of methodology for safety system design study according to IEC 1508, SSIV location studies, Definition of scope of work and coordination of Quantitative Risk Assessment (QRA). Determination of safety critical system and performance standards. Preparation of design safety case as HSEQ member.
Principal Safety Engineer
Exxon Arkutun-Dagi P.A.D Project
Definition of methodology for safety system design study according to IEC 1508, Temporary Refuge Integrity Study, Riser Risk Assessment, Consequence analysis by PHAST, SSIV location studies, Definition of risk acceptance and impairment criteria for project. Definition of scope of work for Quantitative Risk Assessment (QRA). Determination of safety critical system
Senior Safety Engineer
Phillips - Judy Joanne Development - Gas injection project
Review and comments of QRA, PFEER assessment and performance standard, determination of safety critical system based on selected scenarios in QRA, Passive fire protection evaluation based on risk assessment and blowdown study, follow up of HAZOP.
1994 / AMEC Process and Energy (London)
SHELL, PELICAN project - North Sea installation
Senior Safety Engineer
Fire and explosion study report, time dependence jet fire length calculation with MATHCAD, Explosion calculation with SCOPE software, Passive fire protection evaluation and cost benefit analysis, Quantitative Risk assessment.
1993 / Multiplan R&F (Paris)
Principal Safety Consultant
Development of ADEPP software package for the best choice of passive or active fire protection for offshore and onshore installation based on risk assessment and dynamic simulation of jet fire and process parameters.
Feb. 1988 to Oct. 1993 / TECHNIP (Paris)
Supervisory Engineer
1993 / TOTAL QATAR NORTH FIELD PHASE II
Lead Safety Engineer
Basic engineering of production platform, wellhead platform, Accommodation platform, Flare structure, Receiving facilities, co-ordination of facilities safety design, Issue of Safety concept according to API standard and TOTAL SPEC, Hazardous area classification drawing according to API 500 and IP code, Fire & Gas specification and layout drawing, Fire water demand calculation and P&ID of fire water network, design of fire fighting system, Cause and effect matrix according to API 14 C, Escape route and life saving, Major hazard report.
1992 / PETRONAS, MELAKA SECOND REFINERY AND MARINE FACILITIES (Malaysia)
Lead Safety Engineer
PMC contract in JGC office in Yokohama (Japan), review and comment of all safety document of JGC in JAPAN and HYUNDAI in Korea, Participation in HAZOP study (Four month expatriate in Japan and one month in Korea).
1991 / SOFRESID, ABOOZAR, BAHREGANZAR, SOROOSH for IOOC (Iran)
Lead Safety Engineer
Basic engineering of renovation platform, renovation of quarters platform, Multiwell platform, Flare structure, Amine unit platform.
1990 / BIPC, BANDAR IMAM PETROCHEMICAL COMPLEX (Iran)
Lead Safety Engineer
PMC contract, review and comment of all safety drawing of JGC, TOKYO, CHIODA, and other contractors (One month expatriate in Bandar Imam, Iran)
1990 / ADMA, New 36" MAIN OIL LINE (UAE)
Lead Safety Engineer
Basic and detail engineering in TPG Paris, risk assessment of sub sea risk assessment, requisition of fire fighting equipment and bid tabulation report, technical clarification with vendors of fire fighting equipment.
1989 / BANGCHAK, Plant N° 2 (Thailand)
Deputy Lead Safety Engineer
Front and engineering for modification plant
1989 / IOOC, NASR OFFSHORE PRODUCTION COMPLEX (Iran)
Safety Engineer
EPC contract, issue of safety concept, emergency logic diagram, reliability analysis of test separator with high integrity system, P&ID of fire fighting system, fire & Gas detection layout, hazardous area classification, escape route and life saving.
1988 / KELLOG, LNG PROJECT FOR NNPC (NIGERIA)
Safety Engineer
Basic engineering, risk analysis of LNG, Consequence calculations (Pool fire, Jet fire, Explosion, Dispersion, BLEVE, with software like TRACE, WHAZAN, BATEX, UCSIP, TECJET and manual calculation according to AICHE and TNO.
1979 to 1985 / EX-TOP (Iran)
Engineer Manager
Design of natural gas piping, planning and co-ordination meeting with engineers and technicians, negotiation with client, test and approval.
EDUCATION:
- Quantitative Risk Assessment (QRA) Training Course in DNV TECHNICA (UK)
(October 1995)
- Training of Incident Investigation and Root Causes Analysis in HOUSTON (TEXAS)
- Dependability (Safety, Reliability, Maintainability, Availability) and Prevention of Major Technological Risk (MSc.), Ecole Centrale de Paris, France
(1988 to 1989)
Major Master courses were as follows :
Probability & Statistics
Risk analysis
HAZOP study
Consequence analysis (theoretical calculations and the choice of proper models in dispersion, explosion, fire)
Fault tree analysis
Failure modes, effect and critically analysis (FMECA)
Event tree analysis
Cause-consequence analysis
Human error analysis
Case study
Fire protection
Risk management
Industrial Process Control and Instrumentation (B.Sc.) Créteil Technological Institute, France (1987 to 1988)
Applied Physics (B.Sc.) Pahlavi International University (1973 to 1978) - Iran
LANGUAGE AND SPECIAL SKILLS
Verbal and written fluency in English, French, Farsi
Extensive experience with Windows, Word, Excel,Access, Lotus III, Super DB, Mathcad, Freelance, and safety programs like PHAST, FRED, TRACE, TECJET, WHAZAN, BATEX, UCSIP, HYDRONET, SCOPE.LOGAN, RAMS, ADEPP - HSE TOOLKIT
